..
     
EXL Deburring & Polishing Wheels XL-UW
Cut & Polish Wheels CP-UW
Rapid Cut Wheels RC-UW
Multi-Finishing Wheels MU-UW
Light Deburring Wheels LD-UW
Cut & Finish Wheels CF-UW
Deburring & Blending Wheels DB-UW
T-27 EXL Polishing Discs T-27 XL
T-27 CP Cut & Polish Discs T-27 CP
T-27 RC Rapid Cut Discs T-27 RC
T-27 DB Deburring & Blending Discs T-27 DB
T-27 Standard Polishing Discs T-27 S
 
  SURFACE CONDITIONING WHEELS
 
 
                     
High Quality FibraNEX Surface Conditioning Wheels ;

Surface Group unitized wheel products are used in a variety of industries to machine workpieces such as grinding and polishing, to bring the surface of the workpiece being worked on to a desired surface roughness (removal of coating, surface roughness, gloss, transparency, etc.). The use of this abrasive wheel made of non-woven material plays an important role in a wide industrial area, especially in the metal manufacturing industry and also aviation, optics, plastics, and wood industry. It is used in such manufacturing processes, and to improve the surface roughness of materials, remove a sawdust from the surface, and remove rust.

Surface characteristics are gloss, uniform texture and maximum surface smoothness. In most cases, it is an abrasive that has the physical properties and the right balance of abrasive performance needed where the surfaces do not achieve a satisfactory result from conventional abrasives. Because the abrasive particles (zirconium, alumina oxides, silicon carbide, diamond, cerium dioxide, etc.) attached to the staple fiber fibers in the nonwoven layer are uniformly distributed across all nonwoven layers, it has the property of performing the same treatment throughout the entire volume of the product. The result obtained at the time the product is newly used is the same as the surface result obtained at any time until the end. Depending on the type of fiber fiber and abrasive particles  (zirconium, alumina oxides, silicon carbide, diamond, cerium dioxide, etc.) used in the structure, the non-woven surface can only be produced in green, brown, red, navy blue, yellow, gray, black and white colors.

The result obtained at the time the product is newly used is the same as the surface result obtained at any time until the end.

This product is a non-woven abrasive multi-layer material and is used to remove abrasive particles (zirconium, alumina oxides, silicon carbide, diamond, cerium dioxide, etc.), after being compressed with a polymeric binder composition.
2 good reasons to choose FibraNEX Surface Conditioning Wheels are :
                 
1. Prevents corrosion and oxidation on metal,    
 

Anticorrosive, or corrosion inhibitor, is a substance that effectively controls or reduces the reaction of the metal with the medium, that is to say, the corrosion rate, when added to a medium in small amounts. Corrosion inhibitors may also be regarded as retarding catalysts. Corrosion inhibitors are substances that react with the metal surface and slow down the rate of corrosion by reducing the rates of anode or cathode reactions, or both. These substances combine with the base, the cathodic reaction product, to form soluble compounds and form a protective layer on the metal surface as precipitates. Thus, they prevent oxygen from reaching the metal surface. This prevents or delays oxidation and corrosion. Inadequate on the materials it passes on does not cause any harm and does not reduce the effect.

    
                 
2. Prevents fluctuations caused by polishing on a metal surface,    
  Ideally, during polishing, the thickness of the sand is gradually fined to remove scratch marks of thicker sand. Another point is that it is not always working in one direction (the same direction). It is necessary to take the traces of the previous sand with the next sand and observe it. Every time the sand thickness is thinner, it is necessary to work in the opposite direction. Thus, it will be easier to observe to what extent the surface is cleaned since the lines will come opposite each other. This prevents surface fluctuation from occurring in the later stages of polishing.    
     
    Surface Group United States is dedicated to offering expertise and manufacture leading unitized wheel abrasives products to receive the best surface conditioning solutions.
                 
  Contact Site Map        
         
  +90 212 483 20 11 Pbx Home        
  . Surface Group Aşındırıcı ve Makine Sanayi Ltd. Şti. +90 212 483 20 12 Products        
  . Maltepe Mah., Davutpaşa Çiftehavuzlar Sok. No : 3/35 +90 532 354 56 17 About us        
  . Zeytinburnu, 34010 Istanbul - Turkey sales@fibranex.com Security        
    technical@surfacegroup.com.tr Contact        
                 
Surface Group Aşındırıcı ve Makine Sanayi Ltd. Şti.  
Copyright © 2006